Toy SRF

All things specracer!

Novice Typer
Novice Typer
Posts: 24
Joined: Thu Nov 12, 2015 4:33 pm
PostPosted: Fri Sep 14, 2018 5:15 pm
Does anyone knows where to get a toy model SRF?
Thanks
Efren

Ready to Write a Book
Ready to Write a Book
Posts: 73
Joined: Mon Feb 13, 2012 9:04 am
PostPosted: Fri Nov 23, 2018 8:26 am
This is not much help, but there was a model sold that you could put together. I am not sure, but I think it was sold by Thomas Hunt (location unknown.)

Novice Typer
Novice Typer
Posts: 24
Joined: Thu Nov 12, 2015 4:33 pm
PostPosted: Fri Nov 23, 2018 10:24 pm
Thank you!!!

Needs a Life!!!
Needs a Life!!!
Posts: 207
Joined: Wed Dec 14, 2011 10:09 am
PostPosted: Sat Nov 24, 2018 11:34 am
Tom Hunt Lived in buffalo. I believe Chris funk drove for him in the pro series so you might contact him as well. If he still has any of them left,I would like one also
It's better to be last on the grid at a race track, than have pole position at the Funeral Home.

Novice Typer
Novice Typer
Posts: 15
Joined: Sun Nov 18, 2012 8:15 pm

Chassis:
461
PostPosted: Fri Nov 22, 2019 9:09 am
I remember Tom Hunt being very adamant that it was not a toy it was ART. I always assumed this was for copyright reasons or something.
User avatar
Forum Hermit
Forum Hermit
Posts: 134
Joined: Wed Jul 22, 2015 7:35 am
Location: Red Neck Riveria
Chassis:
123
PostPosted: Sun Nov 24, 2019 5:54 pm
Sneak a peak over here:
"Old" Renault Drivers - a little help please"
http://specracer.com/forums/viewtopic.php?f=3&t=3299&hilit=+model+spec+racer

Is this what you are looking for?

There was also a resin based model but I don't have pictures of it. Both are about 2x5 inches when viewed in plan.

Wouldn't it be cool to have one (bigger) as an RC car?

Cheers - Jim
When I used to fly, I was called an AVIATOR.
Now, I race cars. So, am I called a PAVIATOR?

New Member
New Member
Posts: 8
Joined: Mon Feb 13, 2012 2:05 am
PostPosted: Wed Dec 04, 2019 6:55 pm
Does anyone have a 3d computer model of the SRF?

I've got a 3d printer and would love to have a little desk toy.
Would be happy to send one out to whoever finds the model and EfrenO!

Harrison

New Member
New Member
Posts: 8
Joined: Sun Jan 15, 2017 4:14 am

Chassis:
485
PostPosted: Thu Dec 05, 2019 12:01 pm
Geronracing wrote:Does anyone have a 3d computer model of the SRF?

I've got a 3d printer and would love to have a little desk toy.
Would be happy to send one out to whoever finds the model and EfrenO!

Harrison


Bruce at AccelRaceTek has produced body drawings and a 3D model of the body. If he shared this I or someone else could and the wheels and other parts for a printable 3D model.

http://www.accelracetek.com/body-drawing
I have no idols. I admire work, dedication, and competence - Senna

Return to General Discussions

Who is online

Users browsing this forum: No registered users and 6 guests