2015 Spec Racer FORD Gen3
50 posts
• Page 2 of 5 • 1, 2, 3, 4, 5
Rev limit at 4500 RPM for Laguna....kidding. LOTS of room across the back of the car for a good muffler. We won't wait until 2015 to try one there! We learned a lot with the FE about mufflers.
Erik
SCCA Enterprises |
|
Needs a Life!!!
Posts: 1200
Joined: Wed Nov 30, 2011 1:38 am Location: Sunnyvale, CA Chassis: 068 415 Facebook Page: http://facebook.com/HSERacing |
Seems like you could replace part of that pipe with a heavy duty Portland muffler and it would be pretty elegant. (SCCA at Laguna is still 92, I think, but everybody else is 90).
Dave Dave Harriman
"It looks crazy, I understand. But, we only live once and I am going to give it a good try." - Alex Zanardi |
I'm just going to post things as I recall them, or they come up in private discussions.
The Gen3 kit requires NO WELDING to install, it just bolts in. Mike has actually updated the rear / low transmission mount (for the current car too as soon as we get them in stock) to allow another degree of freedom to insure that if your 1.9L conversion was done sloppy, Gen3 will still be a reasonable install. Erik
SCCA Enterprises |
|
Needs a Life!!!
Posts: 511
Joined: Tue Nov 29, 2011 10:12 pm Location: Texas Chassis: 821 |
Mike always has everything figured out! |
Needs a Life!!!
Posts: 1200
Joined: Wed Nov 30, 2011 1:38 am Location: Sunnyvale, CA Chassis: 068 415 Facebook Page: http://facebook.com/HSERacing |
Pictures of engine compartment? Dave Dave Harriman
"It looks crazy, I understand. But, we only live once and I am going to give it a good try." - Alex Zanardi |
Forum Hermit
Posts: 111
Joined: Thu Mar 01, 2012 2:01 pm Location: Houston, Tx Chassis: None |
Nice flat torque curve! It shouldn't be hard to talk the wife out of a vacation or two
Last edited by mhart073 on Sun Jan 13, 2013 12:17 pm, edited 1 time in total.
|
The new engine looks and sounds great! Any chance you could post copies of the horsepower/torque curve and acceleration charts shown in the video?
|
|
The new break rotors sound awesome!
It sounds great, and I hope you guys get lots of great press for all the effort. There really is nothing comparable to SR/SRF/SRG3. |
|
Has any decision been made about the weight? As a guy who has a hard time making the current minimum, I'd like to see at least some of the weight savings left as weight allowance. (If we save 50 lbs with the new motor, only drop the minimum weight 25, for instance).
Just to make what is sure to be a long thread longer. |
|
Needs a Life!!!
Posts: 1200
Joined: Wed Nov 30, 2011 1:38 am Location: Sunnyvale, CA Chassis: 068 415 Facebook Page: http://facebook.com/HSERacing |
Time to start using lead filler on the nose. Dave Dave Harriman
"It looks crazy, I understand. But, we only live once and I am going to give it a good try." - Alex Zanardi |
50 posts
• Page 2 of 5 • 1, 2, 3, 4, 5
Who is online
Users browsing this forum: No registered users and 1 guest