CSR Newsletter

All things specracer!
User avatar
Ready to Write a Book
Ready to Write a Book
Posts: 57
Joined: Sun Jul 06, 2014 11:14 pm
Location: Los Gatos, California
Chassis:
281
Facebook Page:
https://www.facebook.com/Accelracetek-285423508982
PostPosted: Fri Jul 19, 2019 12:32 am
AccelRaceTek publishes a monthly newsletter with the latest news and updates from SCCA-E. If you are interested in receiving the newsletter, go to our website and signup in the Blog or Contact section, the link is: http://www.accelracetek.com/blog.

These are some the topics for this months Newsletter are:

SRF Windscreen
The new SRF windscreens are in stock. The new windshield is designed to reduce or eliminate helmet buffeting for taller drivers. The part number and cost is:

1180103 NEW DASH WINDSCREEN KIT $28.00

Wheel Bearing Internal Retaining Rings
There are three versions of the internal retaining rings or "Snap Rings" that hold in the wheel bearings into the knuckles/spindles. The original ring was a piece of spring steel wire, this was used in the original Renault Alliance knuckles and should only be used in the Renault knuckles. The second generation was an "inch" size snap ring. It can be used on the old Renault knuckles and some of the early SCCA-E knuckles, part number 277759. The latest knuckles have a smaller grove and require the latest or 3rd generation snap ring. The newest snap ring is a metric sized ring and is 2mm (.080") thick, part number 277760. If you use any of the older rings in the newer knuckle, they will not hold the bearing in place. The 2nd generation inch version is 2.36mm (.093") thick. The part numbers for the different rings are:

Part Number Description Price
N/A RENAULT RETAINING RING Not Available
277759 SNAP RING - WHEEL BRG $9.00
277760 WHEEL BEARING RETAINING WIRE-THIN $13.00
Attachments
Snap Ring 1st Generation Wire LR.jpg
Snap Ring 1st Generation Wire LR.jpg (12.12 KiB) Viewed 8392 times
Snap Ring 2nd Generation Inch LR.jpg
Snap Ring 2nd Generation Inch LR.jpg (24.81 KiB) Viewed 8392 times
Snap Ring 3rd Generation Metric LR.jpg
Snap Ring 3rd Generation Metric LR.jpg (29.96 KiB) Viewed 8392 times

Novice Typer
Novice Typer
Posts: 20
Joined: Wed Nov 30, 2011 8:00 pm
PostPosted: Fri Jul 19, 2019 2:55 am
Thanks for the info on the Snap Rings!!!!!!

Needs a Life!!!
Needs a Life!!!
Posts: 389
Joined: Fri Dec 02, 2011 6:02 pm
PostPosted: Fri Jul 19, 2019 8:58 am
What does the windscreen look like?
User avatar
Ready to Write a Book
Ready to Write a Book
Posts: 57
Joined: Sun Jul 06, 2014 11:14 pm
Location: Los Gatos, California
Chassis:
281
Facebook Page:
https://www.facebook.com/Accelracetek-285423508982
PostPosted: Fri Jul 19, 2019 11:42 am
I could only upload 3 photos in the first post, so here it is. If you sign up you will get more updates and info. I also post the update on the blog but it is usually a week or so after the newsletter.
Attachments
Windscreen LR.jpg
Windscreen LR.jpg (81.23 KiB) Viewed 8348 times
User avatar
Needs a Life!!!
Needs a Life!!!
Posts: 348
Joined: Thu Feb 23, 2012 3:35 pm
Location: Ohio
Chassis:
244
PostPosted: Sun Jul 21, 2019 10:47 am
Thanks again for your timely news that we never seem to get directly from Enterprises.

As for the center section tall driver deflector, or as NASA calls it, the CSTDD, we need Bob Breton to do some wind tunnel testing on it... ;)
Mark Fick
I'm pretty confident my last words will be 'well shit that didn't work'
User avatar
Needs a Life!!!
Needs a Life!!!
Posts: 767
Joined: Wed Nov 30, 2011 12:21 am

Chassis:
595
PostPosted: Sun Jul 21, 2019 7:09 pm
Actually, we tried something like this in the Enduro car a while back and I couldn't see over the top of it (or through it)! Fortunately, discovered the issue before we started the 25 hour race! Taller drivers had to suffer in silence (yeah, that never happens!)
Bob Breton - SRF 51 - San Francisco Region

Return to General Discussions

Who is online

Users browsing this forum: No registered users and 25 guests