GEN3 Manual Link - Regularly Updated!

Check out the latest version of the Spec Racer! LBoth ligher weight and more powerful!!! Available soon, racing in 2015!

Needs a Life!!!
Needs a Life!!!
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm
Location: Monument, CO
Chassis:
540
PostPosted: Sat Feb 28, 2015 8:13 pm
The tube lies on/near the bottom of the tank. It goes from the left rear corner of the tank diagonally toward the right front corner of the tank.

DaveP
Quote
User avatar
Needs a Life!!!
Needs a Life!!!
Posts: 767
Joined: Wed Nov 30, 2011 12:21 am

Chassis:
595
PostPosted: Mon Mar 02, 2015 1:15 pm
See the photo in the assembly manual (page 3)...
Bob Breton - SRF 51 - San Francisco Region
Quote

Needs a Life!!!
Needs a Life!!!
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm
Location: Monument, CO
Chassis:
540
PostPosted: Mon Mar 02, 2015 7:07 pm
Bob,

The instruction manual and picture on page 3 do not really explain how/where to install the tube with 8an fitting and the 6an fitting. I think that will probably be in the next update to the manual.

DaveP
Quote
User avatar
Needs a Life!!!
Needs a Life!!!
Posts: 767
Joined: Wed Nov 30, 2011 12:21 am

Chassis:
595
PostPosted: Mon Mar 02, 2015 7:52 pm
Page 26/27?
Bob Breton - SRF 51 - San Francisco Region
Quote

Needs a Life!!!
Needs a Life!!!
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm
Location: Monument, CO
Chassis:
540
PostPosted: Mon Mar 02, 2015 8:07 pm
Pages 26/27 explain how to assemble the water lines, but not how to assemble the "coolant system fill/surge" tank by welding in the 6 and 8 an fittings. Am I missing something? Is there an updated Gen3 manual?

DaveP
Quote
User avatar
Needs a Life!!!
Needs a Life!!!
Posts: 767
Joined: Wed Nov 30, 2011 12:21 am

Chassis:
595
PostPosted: Mon Mar 02, 2015 10:23 pm
Version 10_6 is the latest. I thought the picture of the new tank would be self-explanatory, assuming that retro-fitting the new fittings would mean putting them in the same location as the new (though I bought a new one since my aluminum fortuitously split and wasn't worth fixing.)
Bob Breton - SRF 51 - San Francisco Region
Quote
User avatar
Needs a Life!!!
Needs a Life!!!
Posts: 319
Joined: Fri Dec 09, 2011 11:51 am
PostPosted: Tue Mar 03, 2015 2:42 pm
http://scca-e.com/wp-content/uploads/20 ... 0_10_8.pdf

Latest
Erik
SCCA Enterprises
Quote
User avatar
Needs a Life!!!
Needs a Life!!!
Posts: 202
Joined: Tue Nov 29, 2011 10:14 pm
Location: Black Forest, CO
PostPosted: Tue Mar 03, 2015 3:45 pm
Thanks for the update Erik. Perfect timing for me, as I got started with my install last night!!! :D
Dan

Formerly Teamwork Motorsports #99, Chassis #460
Quote
User avatar
Needs a Life!!!
Needs a Life!!!
Posts: 767
Joined: Wed Nov 30, 2011 12:21 am

Chassis:
595
PostPosted: Tue Mar 03, 2015 6:18 pm
Erik, thanks for the updated post. Looks like the instructions for modifying the tank are here now. Only suggestion would be to please go back to using page numbers rather than roman numerals. :idea:

P.S. The link to the manual on the scca-e site is still pointing to version 10.6...
Bob Breton - SRF 51 - San Francisco Region
Quote

Needs a Life!!!
Needs a Life!!!
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm
Location: Monument, CO
Chassis:
540
PostPosted: Thu Mar 05, 2015 1:47 pm
Dan,

Sent you a PM.

DaveP
Quote
PreviousNext

Return to Spec Racer Gen3

Who is online

Users browsing this forum: No registered users and 4 guests


cron