SpecRacer.com • View topic - Spare Parts at Race

Skip to content

Board index » Technical and Repair Discussions

Change font size

Spare Parts at Race

9 posts • Page 1 of 1

Shine Shine's Profile Ready to Write a Book Posts: 67 Joined: Tue Nov 29, 2011 10:28 pm Location: Texas	Posted: Wed Apr 24, 2013 11:50 am If a CSR was not present at a race you were attending, what spare parts would you take with you? -Scott
Top

stu coomer stu coomer's Profile Ready to Write a Book Posts: 76 Joined: Mon Feb 13, 2012 9:04 am	Posted: Sat Apr 27, 2013 6:57 am All of the aluminum parts north of the front wheels, plenty of pop rivets, pieces of aluminum to mold over broken fiberglass and matching 200 mph tape.
Top

GregCirillo GregCirillo's Profile Needs a Life!!! Posts: 484 Joined: Thu Dec 01, 2011 11:26 am Location: Rockville MD Chassis: 298	Posted: Sat Apr 27, 2013 8:02 am Shine wrote:If a CSR was not present at a race you were attending, what spare parts would you take with you? If I had it, a spare pair of hubs with fresh bearings (one of each type).
Top

srf99 srf99's Profile Needs a Life!!! Posts: 202 Joined: Tue Nov 29, 2011 10:14 pm Location: Black Forest, CO	Posted: Sat Apr 27, 2013 7:23 pm I basically bring every spare part I own, to every race. It takes up room in the trailer, but I have the peace of mind in case I need something. One thing I didn't have for years was a couple spare rod ends, but that is now part of my inventory. Dan Formerly Teamwork Motorsports #99, Chassis #460
Top

WhatsThatNoise WhatsThatNoise's Profile Forum Hermit Posts: 115 Joined: Fri Dec 02, 2011 4:28 pm	Posted: Sun Apr 28, 2013 3:00 am srf99 wrote:I basically bring every spare part I own, to every race. I try to bring weird stuff like a Halon tank and an extra transponder. You need only bring extra beer when starting off in SRF. The community will provide. Dave Gills #80 Red/Silver (chassis 504) Pittsburgh, Pa.
Top

GregCirillo GregCirillo's Profile Needs a Life!!! Posts: 484 Joined: Thu Dec 01, 2011 11:26 am Location: Rockville MD Chassis: 298	Posted: Sun Apr 28, 2013 8:03 am srf99 wrote:I basically bring every spare part I own, to every race. It takes up room in the trailer, but I have the peace of mind in case I need something. One thing I didn't have for years was a couple spare rod ends, but that is now part of my inventory. I bring my car, and paddock near Dan.
Top

mhart073 mhart073's Profile Forum Hermit Posts: 111 Joined: Thu Mar 01, 2012 2:01 pm Location: Houston, Tx Chassis: None	Posted: Mon Apr 29, 2013 3:06 pm stu coomer wrote:All of the aluminum parts north of the front wheels, plenty of pop rivets, pieces of aluminum to mold over broken fiberglass and matching 200 mph tape. And an extra radiator...and extra A arms. If it can break, I've broken it
Top

claysylvester claysylvester's Profile Needs a Life!!! Posts: 352 Joined: Thu Dec 29, 2011 9:17 pm	Posted: Wed May 01, 2013 9:47 am Park near Matt - when he breaks his stuff there is always a few salvageable pieces!
Top

Shine Shine's Profile Ready to Write a Book Posts: 67 Joined: Tue Nov 29, 2011 10:28 pm Location: Texas	Posted: Wed May 01, 2013 4:01 pm Thanks for all the info. Based on everyone's input I am planning to bring the following to each race: 1) Duct Tape 2) Lots of premium Lager Seems like that oughta do it! -Scott
Top

9 posts • Page 1 of 1

Return to Technical and Repair Discussions

Who is online

Users browsing this forum: No registered users and 40 guests


Site Navigation		Contact Us

www.specracer.com

Spec Racer Facebook Page

Click Here to Contact Us.


© 2011-2012 specracer.com. All Rights Reserved.