Knuckles - Bearings - Axel Nuts
14 posts
• Page 2 of 2 • 1, 2
 Needs a Life!!! 
Posts: 511
Joined: Tue Nov 29, 2011 10:12 pm Location: Texas Chassis: 821 |
 Posted: Tue Oct 23, 2012 1:56 amFast Forward components is making a replacement hub - available from your CSR. Much higher quality and $$ than the Renault stuff.
|
steve kramer's Profile
 Ready to Write a Book 
Posts: 88
Joined: Mon Dec 12, 2011 8:16 am Location: Gateway To The West |
Posted: Mon Jan 28, 2013 4:12 am My maiden voyage in #115 is this coming weekend at COTA. What is the torque for the front and rear hubs? Thanks.
Feff |
Feffman's Website|
Posted: Mon Jan 28, 2013 10:27 am 50-55 ft-lbs in the front (enough the get the cotter pin in but not too much; use thin washers if you can't keep close to this range). 150 ft-lbs in the back (check often).
Bob Breton - SRF 51 - San Francisco Region
|
|
 Needs a Life!!!
Posts: 348
Joined: Thu Feb 23, 2012 3:35 pm Location: Ohio Chassis: 244 |
Posted: Tue Jan 29, 2013 11:17 am hey feff:
let me know how the innovate gauge went for you. thanks! Mark Fick
I'm pretty confident my last words will be 'well shit that didn't work' |
14 posts
• Page 2 of 2 • 1, 2
Return to Technical and Repair Discussions
Who is online
Users browsing this forum: No registered users and 56 guests
| Site Navigation | Contact Us | |||||||
|
|
|
| © 2011-2012 specracer.com. All Rights Reserved. | ||||||||