Frame Paint vs. Power coating
4 posts
• Page 1 of 1
![]() Needs a Life!!! ![]()
Posts: 1200
Joined: Wed Nov 30, 2011 1:38 am Location: Sunnyvale, CA Chassis: 068 415 Facebook Page: http://facebook.com/HSERacing |
We have a frame going in for bead blasting, can't decide whether to go with paint or powder coating. I have cars with both, and see benefits and drawbacks with both. Curious what everybody else thinks?
Dave Harriman
"It looks crazy, I understand. But, we only live once and I am going to give it a good try." - Alex Zanardi |
![]() Needs a Life!!! ![]()
Posts: 511
Joined: Tue Nov 29, 2011 10:12 pm Location: Texas Chassis: 821 |
Dave: in the old days metal finishing was liquid paint. PC is a far superior finish: no rust creep, the bond is better, the coating is generally a lot thicker, possibly more corrosion resistant if the right PC is used. Liquid paint has one advantage to me:easier touch up. But you'll touch up more since generally it is not as durable. And if you need the body of a car painted liquid is the choice. but not on a frame. YMMV
|
![]() Forum Hermit ![]()
Posts: 136
Joined: Thu Dec 01, 2011 4:45 pm Location: Oregon Chassis: 404 |
Power Coating is heavier than liquid paint.
We did both. Currently the car is power coated. It is easier to clean when power coated. I like a lighter color of frame color because of the ability to spot frame damage or frame cracks. Merry Christmas everyone, |
![]() Ready to Write a Book ![]()
Posts: 57
Joined: Sun Jul 06, 2014 11:14 pm Location: Los Gatos, California Chassis: 281 Facebook Page: https://www.facebook.com/Accelracetek-285423508982 |
Dave,
I would go with paint. Repairs on PC is a nightmare. It is almost impossible to grind off the PC before welding so it burns off and it can contaminate a weld. Also, after you do the welding, spray paint doesn't stick very well. If you ever have to paint the frame again, stripping the OC requires a very big oven to cook off the paint, you can't sandblast PC off. Also, I agree that it is harder to see frame cracks with the thick PC. |
4 posts
• Page 1 of 1
Return to Technical and Repair Discussions
Who is online
Users browsing this forum: No registered users and 60 guests