GEN2 ECU Connection

Technical and Repair Discussions

Still Learning to Type
Still Learning to Type
Posts: 25
Joined: Sun Jan 15, 2017 4:14 am

Chassis:
880-2
PostPosted: Wed Oct 09, 2019 7:05 pm
Does anybody know if the SRF Gen2 ECU has a connection for a data logger and if so where I could find documentation for it?

Thanks in advance.
I have no idols. I admire work, dedication, and competence - Senna
User avatar
Ready to Write a Book
Ready to Write a Book
Posts: 57
Joined: Sun Jul 06, 2014 11:14 pm
Location: Los Gatos, California
Chassis:
281
Facebook Page:
https://www.facebook.com/Accelracetek-285423508982
PostPosted: Fri Oct 11, 2019 1:29 am
The only signal you can get out of the GEN2 wire harness is the tachometer signal. You will need to run separate sensors for water and oil. We have some GEN2 schematics on our website www.accelracetek.com. It is in the tech section under schematics. http://www.accelracetek.com/schematics- ... lectronics
Bruce @ AccelRaceTek

Still Learning to Type
Still Learning to Type
Posts: 25
Joined: Sun Jan 15, 2017 4:14 am

Chassis:
880-2
PostPosted: Fri Oct 11, 2019 11:47 am
brichardson wrote:The only signal you can get out of the GEN2 wire harness is the tachometer signal. You will need to run separate sensors for water and oil. We have some GEN2 schematics on our website http://www.accelracetek.com. It is in the tech section under schematics. http://www.accelracetek.com/schematics- ... lectronics
Bruce @ AccelRaceTek


Thank you, Bruce.
I have no idols. I admire work, dedication, and competence - Senna
User avatar
Forum Hermit
Forum Hermit
Posts: 111
Joined: Fri Sep 22, 2017 5:02 pm

Chassis:
615
PostPosted: Fri Oct 11, 2019 4:21 pm
What system are you installing? Had a friend sell me an old Mychron3 XG Log for almost nothing. That is going to be my plan for data system for the moment.

Let me know if you have any issues or what not. Gen 2 guys need to stay together lol.

Btw....don't suppose anyone know of a bracket template or way to mount a mychron 3 to the steering wheel?
Chris B
Chicago Region
Flagging and Communications / Emergency Services

Good chance you have seen me waving flags like a crazy person at some point.

Still Learning to Type
Still Learning to Type
Posts: 25
Joined: Sun Jan 15, 2017 4:14 am

Chassis:
880-2
PostPosted: Mon Nov 25, 2019 4:27 pm
TrackBrat wrote:What system are you installing? Had a friend sell me an old Mychron3 XG Log for almost nothing. That is going to be my plan for data system for the moment.

Let me know if you have any issues or what not. Gen 2 guys need to stay together lol.

Btw....don't suppose anyone know of a bracket template or way to mount a mychron 3 to the steering wheel?


I am installing a Mychron MXM which attached to the dash. I've bought a pressure sensor and a water temp sensor to replace the existing gauges.

Mounting a MyChron 3 should be fairly easy. You should be able to fabricate a mount or use one from a Kart MyChron 4 or 5 like this one https://cometkartsales.com/Black-Rhino-Steering-Wheel-Gauge-Mount.html

If you have a MyChron 3 Gold which has a very large cable coming out of the back you need to dash mount it.
I have no idols. I admire work, dedication, and competence - Senna

Return to Technical and Repair Discussions

Who is online

Users browsing this forum: No registered users and 8 guests