Tripod "Can" Wire Spring Clip
Posted: Sun Sep 30, 2018 2:05 pm
I'm replacing an old style inner tripod can with the new style. The new style has a wire spring clip to retain the bearing inside the can. Seems like a bit of a PITA to get that clip in after greasing. I noticed that the Kanga Motorsports write-up doesn't mention removing or installing the clip.
http://www.kangamotorsports.com/blog/20 ... -servicing
Do you guys put the clip in or leave it out?
It's hard to picture how the bearing would pull-out of the can after everything is put together.
Wire Spring Clip:
https://photos.google.com/share/AF1QipM ... lQVkNyWFNr
TIA,
Ed
http://www.kangamotorsports.com/blog/20 ... -servicing
Do you guys put the clip in or leave it out?
It's hard to picture how the bearing would pull-out of the can after everything is put together.
Wire Spring Clip:
https://photos.google.com/share/AF1QipM ... lQVkNyWFNr
TIA,
Ed