Page 1 of 1
MXL Pista RPM not registering correctly on GEN 2
Posted:
Sat Mar 19, 2016 5:14 pmby DWhite
Just installed my new MXL Pista in a GEN2, hooked the RPM wire (dash side) to the blue tach wire (vehicle harness) and the RPM reading is higher then the actual engine speed. Reading 2000 when idling at 800 RPM; any ideas on what I have set up wrong in my configuration?
Re: MXL Pista RPM not registering correctly on GEN 2
Posted:
Sat Mar 19, 2016 6:31 pmby David Ferguson
In Race Studio2, with your device configuration selected, use the "System Configuration" tab, and look at the RPM parameters in the upper left -- you should have "AIM Sensor" selected, and the Multiply Factor should be /2.
Re: MXL Pista RPM not registering correctly on GEN 2
Posted:
Sun Mar 20, 2016 9:41 amby DWhite
Thank you for the information Dave, the RPM is now reading correctly. Since you are bating a 1000, any idea how I connect the alternator lamp to the new display? I like having, at the very least, an idiot light. Thank you for your help.
Re: MXL Pista RPM not registering correctly on GEN 2
Posted:
Mon Mar 21, 2016 2:47 pmby dave
DWhite wrote:Thank you for the information Dave, the RPM is now reading correctly. Since you are bating a 1000, any idea how I connect the alternator lamp to the new display? I like having, at the very least, an idiot light. Thank you for your help.
Dave F. is pretty much always batting 1000 with it comes to data.
A lot of us set voltage alarms, better than the light...
Dave H.