Master Cylinder Output Size/Thread pitch

Technical and Repair Discussions

Still Learning to Type
Still Learning to Type
Posts: 30
Joined: Tue Sep 03, 2013 4:24 pm
PostPosted: Mon Feb 22, 2016 9:59 am
I'm installing a brake pressure sensor between the master cylinder and the brake line, and intend to put a simple T inline with the current stainless steel braided brake line.

What size/thread pitch is the brake line that screws into master cylinder?
User avatar
Forum Hermit
Forum Hermit
Posts: 173
Joined: Mon Dec 05, 2011 1:06 pm
Location: Houston TX
Chassis:
741
PostPosted: Mon Feb 22, 2016 3:28 pm
Should be 3/8-24 (-3 AN)

http://www.hrpworld.com/store/default/b ... inder.html

http://www.wilwood.com/Images/MasterCyl ... dwg-lg.jpg

When I added brake pressure transducers, I used the following parts from Pegasus:

3223 Steel 1/8 NPT Female Tee

3250-02-03S 1/8 NPT Male - 3AN Male Steel Adapter

3253-02-03S 1/8 NPT Male - 3AN Steel 90' Elbow

3278-03 Aluminum Crush Washer, 3/8 ID pkg of 5

Still Learning to Type
Still Learning to Type
Posts: 30
Joined: Tue Sep 03, 2013 4:24 pm
PostPosted: Wed Feb 24, 2016 9:37 pm
Great, thanks a bunch! This is exactly what I needed.

Return to Technical and Repair Discussions

Who is online

Users browsing this forum: No registered users and 14 guests