Changing engines in our gen 2 and thought I would buy new plugs and wires. Went to the local Ford dealer and they said that they no longer handle Motorcraft part # wr 4059. Vaguely remember buying plug wires from Steve Fenske when we were at the Topeka track and that he indicated they were out of a Ford Ranger as they were just a bit longer and fit better. If I remember right I believe there were 6 plugs so must have been out of a 6. Does anyone have that part #? I checked the plug wires and I can't read the number on them.
Pat
Gen 2 plug wires
6 posts
• Page 1 of 1
Bob Chapman's old site lists them as F1PZ-12259-C
|
|
That one is discontinued also. Thanks though for the info. It does show it as for a 91 ford ranger so I will see if there is a new #.
Pat |
|
Needs a Life!!!
Posts: 1200
Joined: Wed Nov 30, 2011 1:38 am Location: Sunnyvale, CA Chassis: 068 415 Facebook Page: http://facebook.com/HSERacing |
Maybe discontinued by Motorcraft?
Dave Harriman
"It looks crazy, I understand. But, we only live once and I am going to give it a good try." - Alex Zanardi |
Ford may have stopped making them, but they are available on Amazon and Ebay.
|
|
Needs a Life!!!
Posts: 260
Joined: Wed Feb 08, 2012 8:45 pm Location: Daytona Beach, FL |
Why don't you get a set of the better wires that are out there (red ones) ? Should be a lot of these set from the Gen3 conversion. I know I have a few set myself. Someone close to you and you could get them for free or just for the cost of shipping. Better and cheaper then the Ford type.
|
6 posts
• Page 1 of 1
Return to Technical and Repair Discussions
Who is online
Users browsing this forum: No registered users and 7 guests