Gen 3 purchase - need quick jack

All things specracer!

Novice Typer
Novice Typer
Posts: 23
Joined: Wed Feb 04, 2015 9:18 pm
PostPosted: Mon Jun 26, 2017 9:43 am
Hi,
Just purchased a gen 3 car to start racing SFR3
all over the South East. Looking forward to race with many of you guys!

Can anyone recommend a good soursce for purchasing a quick jack?

Thanks in advance !

Ready to Write a Book
Ready to Write a Book
Posts: 98
Joined: Fri Apr 22, 2016 5:11 pm
PostPosted: Mon Jun 26, 2017 2:59 pm
Pegasus sells a quickjack with 1,000 lb capacity. Expressly NOT for SRF which is a little portly for a dainty formula car jack. So I am NOT recommending this jack, nor am I recommending that you put blocks/stands under the frame if you ever disregard my warnings and use this jack on an SRF.

https://www.pegasusautoracing.com/produ ... ?RecID=872 https://www.pegasusautoracing.com/productdetails.asp?RecID=872
User avatar
Forum Hermit
Forum Hermit
Posts: 102
Joined: Tue Nov 29, 2011 10:53 pm
Location: Off the apex...
Chassis:
#204
Facebook Page:
http://facebook.com/​jerry.aplass
PostPosted: Mon Jun 26, 2017 3:14 pm
I like my PBS Quick Jack, see:

http://www.quickjacks.com/jacks.html

Stands:

http://www.quickjacks.com/stands.html
Jerry Aplass SRF #204
San Francisco Region
"Straights are for fast cars. Turns are for fast drivers." - Colin McRae
User avatar
Needs a Life!!!
Needs a Life!!!
Posts: 766
Joined: Wed Nov 30, 2011 1:03 am

Chassis:
098
Facebook Page:
http://www.facebook.com/#!/denny.stripling
PostPosted: Mon Jun 26, 2017 4:16 pm
Can't beat the PBS, IMO though they are proud of them. There was a dearth of them a while back and people were looking everywhere to find one. It appears they are making them again now.
____________
Bay 12, please.

Novice Typer
Novice Typer
Posts: 23
Joined: Wed Feb 04, 2015 9:18 pm
PostPosted: Mon Jun 26, 2017 6:57 pm
Thanks for all the replies!
Appreciated.
User avatar
Needs a Life!!!
Needs a Life!!!
Posts: 348
Joined: Thu Feb 23, 2012 3:35 pm
Location: Ohio
Chassis:
244
PostPosted: Mon Jun 26, 2017 9:34 pm
I had fabricated a homemade one years ago and with my Gen3 conversion, decided to treat my car to a better quick jack. I purchased one from Brad Brooks, who is involved with Brooks Machining in upstate NY. His work number if it is still good is 607-369-9376. I cannot remember how much I paid for his model, but it is a first rate quick jack that will be an awesome one for anyone's SRF.
Attachments
image.jpeg
image.jpeg (63.21 KiB) Viewed 10622 times
Mark Fick
I'm pretty confident my last words will be 'well shit that didn't work'

Return to General Discussions

Who is online

Users browsing this forum: Google [Bot] and 18 guests


cron