Hi,
Planning on purchasing a Gen 3 conversion and would like to know if there is an info source / manual for maintenance/ race set up etc . I am planning on doing all maintenance and race set up myself.
Any info on the above would be highly appreciated.
Thanks !
Gen 3 maintenance/ race set up
7 posts
• Page 1 of 1
Here's a link to the Hoosier basic setup info
http://racetire.com/2015/11/hoosier-has ... -srf-tire/ After that befriend 4 fast guys, get 6 different answers and adjust from there. Fact: one fast guy is lying, one fast guy is lying twice, one fast guy can go fast with any setup so what he said doesn't matter and one fast guy has a setup that will work for you and will honestly share the info. The trick is figuring out who is who. Good luck. It's better to be last on the grid at a race track, than have pole position at the Funeral Home.
|
|
Ask your CSR, too. That's part of why they are around.
|
|
Many thanks for your replies much appreciated !
I did find some useful info on the 'Kangamotorsports.com' website. Cheers ! |
|
Also, don't miss the gen3 forum on this site.
|
|
Ha, we need a Like button |
|
Ready to Write a Book
Posts: 96
Joined: Sat May 03, 2014 12:14 pm Location: San Jose, Ca Chassis: 501 Facebook Page: http://www.facebook.com/kangamotorsports/ |
I would add to Lee's post that once you get faster and are competing with them they are all lying or telling half truths hahaha.
I.e. Flat out = Flat on the throttle but left foot braking |
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 15 guests