FrankenSpec - A Flaggers SRF Build

All things specracer!
User avatar
Needs a Life!!!
Needs a Life!!!
Posts: 274
Joined: Thu Feb 23, 2012 3:35 pm
Location: Ohio
Chassis:
244
PostPosted: Tue Jan 09, 2018 11:13 pm
Chris: Whatever body parts you can procure, give me a shout if they are in need of fiberglass work.
I'm known to "rescue" moderately to badly smashed, overweight, etc parts and bring them back to life.
Email me for my number. Good luck!
Mark Fick
User avatar
Novice Typer
Novice Typer
Posts: 18
Joined: Fri Sep 22, 2017 5:02 pm
PostPosted: Thu Jan 11, 2018 7:57 pm
Was able to do an inventory today, finally!

There are a few pieces I am unsure of exactly what they are, due to what I have diagrams for. Anyone able to identify?

https://drive.google.com/open?id=1Otyg0G-zIF_JRoIkR7N1wpIDi_iiZS8G

I know one of these is an engine mount. Others?
https://drive.google.com/open?id=1XXpz_Sw7p50KhcEWQrkVktzLUKM1w3_2

Still have a lot to go in regarding parts. The obvious to me is Suspension, Steering and brakes.

Does anyone have cooling layout and other routing for Gen 2?
Chris B
Chicago Region
Flagging and Communications / Emergency Services

Good chance you have seen me waving flags like a crazy person at some point.

Needs a Life!!!
Needs a Life!!!
Posts: 483
Joined: Tue Nov 29, 2011 10:12 pm
Location: Texas
Chassis:
821
PostPosted: Thu Jan 11, 2018 10:38 pm
first photo:
clutch slave cylinder
second photo from top:
clutch fork
on left - not sure, might be an unused part that had something to do with the throttle cable
on right- upper motor mount
far right - alternator mount
left: the two sheet metal pieces are the front motor mount
the little sheet metal piece in the middle is the remote oil adapter mount

(hopefully I passed the test)

New Member
New Member
Posts: 5
Joined: Wed Jan 04, 2012 11:55 pm
PostPosted: Sat Jan 13, 2018 6:06 pm
PM sent
Previous

Return to General Discussions

Who is online

Users browsing this forum: Bing [Bot] and 4 guests