Very cool! Nice job Mr. Davies!
Great that it bolts up to the existing trans! It may cause a little increase in breakage of the trans, but we have so little trouble now that it shouldn't pose a significant problem. We broke third gear this last year, but that was after something like 70 races. New and better sources for internal replacement parts should help take care of that though.
The exhaust note sounds so much better we might be able to claim it's a real race car to outsiders now! I would also think the balance may be much better now and any need for narrower front tires may go away. The huge loss in weight in back should not only increase rear end grip, but also alleviate any need for narrower front tires. I'm guessing we could probably get more life out of the rears as well. Right now we're seeing a loss in grip for the rears after just 3 or 4 heat cycles with the fronts going more like 10 or 12.
I wonder about having less body roll and weight on the tires creating a desire to run less camber. We are already on the edge when it comes to camber and the limits of the working range in the axles and CV joints. Any chance that axles designed with bias ply tires in mind, rather than radials, could be part of the package?
Another plus for this package is that the increased performance, as well as the much improved exhaust note should help sway newcomers towards Spec Racer and away from SM....
The whole Enterprises team should be proud!
Jeff
2015 Spec Racer FORD Gen3
50 posts
• Page 5 of 5 • 1, 2, 3, 4, 5
If the tranny stays in the same place with the new motor (I don't remember reading if that's true or not, I suspect it is true), there's no reason any axle change couldn't be done earlier or after the new motor... I don't think anyone is breaking axles on a regular basis now, are they? If I recall correctly, it was more of a travel issue than a failure under engine load so I think they should be able to handle the new motor just as well... |
|
What a great effort by you all, Mike has done wonders to restoring the WOW in this 28 year old design. Thanks for your commitment to the class, is there anything we can do to encourage Ford to kick in some advertising dollars to keep the class name?
Really like the wheel dash your using, will the cutout style steering wheel be allowed in the GCR? |
|
Forum Hermit
Posts: 120
Joined: Thu Feb 23, 2012 3:22 pm Location: Oakland, CA Chassis: 865, 91, 3 |
Race prep,
Sorry, but I don't know your name. I believe that that specific type of wheel is currently allowed in the GCR. The type that is not allowed is the 'Butterfly' wheel (like dragsters use) that is cut out on the top and the bottom. Rod |
Thanks I just wouldn't want an over zealous tech inspector disallowing a 300 dollar wheel.
It's Griff |
|
Needs a Life!!!
Posts: 1200
Joined: Wed Nov 30, 2011 1:38 am Location: Sunnyvale, CA Chassis: 068 415 Facebook Page: http://facebook.com/HSERacing |
We have someone who has had one for a while... Dave Harriman
"It looks crazy, I understand. But, we only live once and I am going to give it a good try." - Alex Zanardi |
Forum Hermit
Posts: 111
Joined: Wed Nov 30, 2011 12:12 am Chassis: 809 Facebook Page: https://www.facebook.com/Hutch52 |
Maybe this has been addressed but is there some kind of support for the exhaust in the rear? It would seem to me that when the car bumps the long throw of the header will create a large force moment that will eventually cause the header to crack at the attachment to the manifold.
|
I don't see anything in this photo. There's a collar clamp attaching the tailpipe to the header, but I do not see anything bracing the header outlet. With this config, I assume there will be more room in front of the engine, and less heat on the driver's azz. http://specracer.com/SRFInfo/Gen3/EngLeftRear.JPG |
|
Needs a Life!!!
Posts: 1200
Joined: Wed Nov 30, 2011 1:38 am Location: Sunnyvale, CA Chassis: 068 415 Facebook Page: http://facebook.com/HSERacing |
I think that is an older configuration in the stills. IIRC, the videos have a different exhaust. They aren't "official" photos, they have been posted at random. My impression is things are still "subject to change without notice". Dave Dave Harriman
"It looks crazy, I understand. But, we only live once and I am going to give it a good try." - Alex Zanardi |
I've had one for several years and love it! Never a question by tech inspectors. Dan
Formerly Teamwork Motorsports #99, Chassis #460 |
|
50 posts
• Page 5 of 5 • 1, 2, 3, 4, 5
Who is online
Users browsing this forum: No registered users and 8 guests