SpecRacer.com • View topic - GEN3 Engine Swap Procedure

Board index » Spec Racer Gen3

Change font size

Print view

GEN3 Engine Swap Procedure

Post a reply

6 posts • Page 1 of 1

Ready to Write a Book

Posts: 57
Joined: Sun Jul 06, 2014 11:14 pm
Location: Los Gatos, California
Chassis: 281
Facebook Page: https://www.facebook.com/Accelracetek-285423508982

Posted: Fri Jan 12, 2018 4:03 am

We just added engine removal and installation procedures to our Website. There are procedures for both GEN2's and GEN3's. The procedures include a detailed process and a simple listing of the process steps. Feel free to give us input or make recommendations if you have any. Click on the link below to get you to the .pdf document.

http://www.accelracetek.com/engine-swap ... es-gen2-3/

Bruce @ http://www.accelracetek.com

Last edited by brichardson on Wed Jan 09, 2019 1:29 pm, edited 1 time in total.

Top

markfick markfick's Profile Needs a Life!!! Posts: 348 Joined: Thu Feb 23, 2012 3:35 pm Location: Ohio Chassis: 244	Posted: Fri Jan 12, 2018 3:11 pm Nice revision Bruce! Especially the added pics, generous labels and wiring diagrams. This should help any of us that do our own work, new and for pulling/replacement/repair issues. It's now on my iBooks for reference. Mark Fick I'm pretty confident my last words will be 'well shit that didn't work'
Top

Novice Typer

Posts: 20
Joined: Wed Nov 30, 2011 8:00 pm

Posted: Sat Jan 13, 2018 12:19 am

brichardson wrote:We just added engine removal and installation procedures to our Website. There are procedures for both GEN2's and GEN3's. The procedures include a detailed process and a simple listing of the process steps. Feel free to give us input or make recommendations if you have any. Click on the link below to get you to the .pdf document.

https://bruce-richardson-qu6e.squarespa ... nfig/pages

Bruce @ http://www.accelracetek.com

Very nice set of instructions!!! I will be using these in the next few weeks, thanks!

Top

Jparris Jparris's Profile Forum Hermit Posts: 100 Joined: Fri Sep 21, 2012 10:37 am	Posted: Sat Feb 10, 2018 11:06 am When I click on the link it takes me to a login screen for SquareSpace. I even tried setting up a new account but when I tried to log in it said my e-mail address was not registered. Am I doing something wrong or just need to give the site time to recognize the new account?
Top

Bob K Bob K's Profile Ready to Write a Book Posts: 97 Joined: Thu Jul 25, 2013 10:52 pm	Posted: Sun Feb 11, 2018 3:34 pm Use this link https://bruce-richardson-qu6e.squarespace.com
Top

brichardson brichardson's Profile brichardson's Website Ready to Write a Book Posts: 57 Joined: Sun Jul 06, 2014 11:14 pm Location: Los Gatos, California Chassis: 281 Facebook Page: https://www.facebook.com/Accelracetek-285423508982	Posted: Wed Jan 09, 2019 1:30 pm The best link to use is: http://www.accelracetek.com/engine-swap ... es-gen2-3/
Top