Re: EVO4 Initial Set Up
Posted:
Sat May 28, 2016 12:06 pmby srcypher
My g dash has a stretch coil cable, so I don't expect problems good my to the left side pod. I also run a data hub because I use 2 smartycam hd gp, so you have a little more working space. Next week when I'm back I'll post some pictures of my gen 2 and 3 locations. The gen2 is a lot messier, as I have an expansion hub also for all the extra sensors. In the gen 3 I plan on just brake pressure, steer input, and oil t.
Re: EVO4 Initial Set Up
Posted:
Sun May 29, 2016 1:06 pmby breton
Oil Temp is available from the ECU in the Gen3.
Re: EVO4 Initial Set Up
Posted:
Tue May 31, 2016 3:15 pmby David Ferguson
Lotus5 wrote:The cable supplied with the G dash seems kind of short. Not sure it would reach a location on the left side near the Gen3 ECU, for example. Is there some kind of extension cable? Or do you get one of the CAN extension hubs and use that?
Yes, you can get a CAN Extension cable for the G-Dash. 1, 2 and 4 meter lengths.
http://shop.veracitydata.com/products/c ... 5-pin-5pin