GEN3 Manual Link - Regularly Updated!
27 posts
• Page 3 of 3 • 1, 2, 3
Is 0.10.8 still the most current Rev of the Installation Manual?
|
|
The first link is for the 10.6 manual. The 10.8 link is dead. Does someone have the latest manual? Or can send me the correct link?
Please and thank you. Scott Cypher
SRF3 #577 G3 |
|
Scott,
Check your email, should be there. Robert |
|
Still Learning to Type
Posts: 32
Joined: Sat May 17, 2014 12:08 am Location: Farmington Hills, MI Chassis: 214 |
This one works:
http://media.wix.com/ugd/0f9e9d_5fd149d ... 420372.pdf Or, navigate from scca-e.com to SRF to Technical Information. |
Thanks, gentlemen....
Scott Cypher
SRF3 #577 G3 |
|
Ready to Write a Book
Posts: 57
Joined: Sun Jul 06, 2014 11:14 pm Location: Los Gatos, California Chassis: 281 Facebook Page: https://www.facebook.com/Accelracetek-285423508982 |
NEW GEN3 CONVERSION MANUAL
We just added our version of the GEN3 Conversion Manual. We added to the great manual that Mike created. The new version has more photos and a lot more information on the wiring, including schematics. It is our first revision and if you have any suggestions or ideas for improvements just let us know. The link is: http://www.accelracetek.com/conversion-manual-gen3/ Go to our website, select "Tech", then "Conversion Manual", then scroll down and click on the text below "GEN3 Conversion Manual" Bruce - AccelRaceTek |
THIS is the GEN3 manual we should have had from the get-go. It's clear, concise and easy to follow. Exceptionally well written and illustrated.
The only thing I would recommend is that Enterprises clearly label the parts in their bags to coordinate with the manual steps. The long part number strings can give one a headache after awhile. Dave: This link should be made into a sticky at the top of the GEN3 Forum. Great work! Congratulations! |
|
27 posts
• Page 3 of 3 • 1, 2, 3
Who is online
Users browsing this forum: No registered users and 2 guests